18th May 2026
Introduction
The global shipping industry is facing an urgent need to significantly cut its greenhouse gas (GHG) emissions to align with the IMO’s ambitious targets for net-zero emissions by 2050. Our first article in this series covered various alternative fuels. However, the transition to net-zero emissions requires more than just switching to cleaner fuels. The journey to maritime decarbonisation demands a range of supporting technologies that improve energy efficiency, facilitate the use of renewable energy sources and capture carbon from ships. This second article explores essential technologies, such as advanced dual-fuel engines, innovative Wind-Assisted Propulsion Systems (WAPS) and the emerging field of Onboard Carbon Capture and Storage (OCCS). The maritime industry has already commenced its transition towards adopting these technologies as part of its decarbonisation journey.

The world’s biggest LNG dual-fuel engine WinGD X92DF (source: WinGD)
- Dual-fuel engines
Dual-fuel technology enables an engine to run on two different types of fuel, typically a conventional diesel fuel and a cleaner alternative, such as LNG, hydrogen or biofuels. A dual-fuel engine is designed to switch between the two fuels. It allows for a reduction in traditional fuel consumption and thus can significantly reduce GHG emissions. Whilst a number of dual-fuel technologies are applied to new vessels, they can also be retrofitted onto existing vessels depending on their age and operational pattern. Several major engine manufacturers, including MAN Energy Solutions (MAN ES), Wärtsilä, WinGD, HD Hyundai and Yanmar, have developed dual-fuel engines that run on different alternative fuels.
- LNG dual-fuel engine
LNG, primarily composed of methane, is a widely used alternative fuel. LNG dual-fuel engines can operate on either LNG or a conventional fuel, typically diesel. When running in LNG mode, the engine operates on a lean-burn combustion process to achieve high power and low emissions. This means that the engine operates with an LNG-air mixture where there is more air than is necessary for complete combustion. The engine usually operates on the Otto cycle when burning LNG, which involves a spark ignition, because a gaseous fuel requires a spark to initiate combustion. Gasified LNG is premixed with air before entering the combustion chamber of the engine under low pressure. After the LNG-air mixture is compressed by a piston in cylinders, a small amount of pilot diesel fuel is injected into the combustion chamber to ignite the mixture. Whilst most of the methane in LNG is burned in the combustion process, some of the methane remains unburned and escapes with the exhaust gases into the atmosphere. This phenomenon is known as methane slip. It is a significant concern because even small amounts of methane slip can offset the benefits of using LNG-fuelled engines, given that methane has 28 times greater global warming potential than CO2 on a 100-year timescale. Therefore, reducing methane slip from LNG dual-fuel engines is crucial.
To minimise methane slip, several technologies are currently being used, including engine design improvements, operational adjustments and aftertreatment solutions. Engine manufacturers have developed new technologies with improved engine design to cut methane slip. According to WinGD, their new dual-fuel engine fitted with a viable compression ratio (VCR) technology can cut methane slip by 30% compared to the same engine without VCR. It was reported that their new engines produce similar GHG emissions to high-pressure dual-fuel technologies. Another engine provider MAN ES’s Otto cycle LNG dual-fuel engine now comes equipped with exhaust gas recirculation (EGR) that can cut methane slip by up to 50% compared to its first generation. Their high-pressure diesel cycle LNG dual-fuel engines produce negligible levels of methane emissions compared to Otto cycle dual-fuel engines. According to the lobby group, SEA-LNG, high-pressure diesel cycle two-stroke dual-fuel engines account for approximately 75% of the LNG-powered vessel orderbook.
Aftertreatment solutions such as oxidation catalysts are under development. An oxidation catalyst is a device placed in the exhaust stream of the engine. When the exhaust gases containing methane pass over the catalyst, the methane reacts with oxygen, producing CO2 and water vapour. While CO2 is also a greenhouse gas, its global warming potential is significantly lower than that of methane. According to MAN ES, the use of oxidation catalyst can reduce 70% of methane slip. Other companies, such as HD Hyundai and Yanmar, are also actively developing and testing oxidation catalysts.
- LPG dual-fuel engine
LPG, a mixture of propane and butane, is a promising alternative fuel due to its lower GHG emissions compared to conventional fuels. LPG dual fuel engines are capable of operating on LPG and a conventional fuel. When running in liquid fuel mode for conventional fuels such as diesel or Heavy Fuel Oil (HFO), the engine works as an ordinary diesel engine, which ignites fuel through compression. During LPG operation mode, the engine utilises a lean-burn combustion process and thus operates with an LPG-air mixture. After the LPG-air mixture is compressed in the engine cylinders, it always needs a certain quantity of diesel as a pilot fuel to ignite the mixture. LPG dual fuel engines have been developed by several engine manufacturers, including MAN ES, Wärtsilä and Kawasaki Heavy Industries. Vessels leveraging LPG as a fuel benefit from cost savings due to lower fuel consumption as well as reduced emissions, SOX by 97%, CO2 by 15% and NOX by 20%, compared to HFO. As for LPG carriers, LPG storage tanks on deck are connected to the cargo system. This means that LPG cargo can also be used as a fuel, reducing time and fees for bunkering. LPG dual-fuel engines do not have methane slip issues.
- Methanol dual-fuel engine
Methanol, which is a flammable liquid alcohol, is a low carbon fuel that has only a single carbon molecule. It is commonly used in dual-fuel engines that can switch between methanol and a conventional fuel, typically diesel. Methanol dual-fuel engines have been developed by several engine makers, such as MAN ES, Wärtsilä and WinGD. Unlike other dual-fuel engines operating on a gaseous fuel, methanol dual-fuel engines are designed for burning low-flashpoint-liquid fuels as methanol has a low flashpoint of only 12°C. In methanol mode, liquid methanol is injected into the combustion chamber at high pressure as the primary fuel. Since methanol has a high auto-ignition temperature, it requires a pilot fuel as a source of ignition to start burning in the engine. Marine Diesel Oil (MDO), Marine Gas Oil (MGO) or Heavy Fuel Oil (HFO) can be used as a pilot fuel. Methanol dual-fuel engines offer significant emission reductions compared to traditional diesel engines, SOX by 99%, NOXby 60% and CO2 by 7%. When green methanol is used, CO2 emissions can be reduced by up to 95%.
The engines are equipped with double-walled fuel distribution systems for safety reasons, particularly to prevent leaks and minimise the risk of fire because methanol is highly flammable and toxic. All methanol pipes in the fuel system are also designed as double-walled installation. Crew members handling methanol must be trained to use methanol in a safe manner. Methanol is corrosive in the presence of aluminium and titanium alloys, which are commonly used in fuel systems for conventional and natural gas fuels. Therefore, materials providing sufficient corrosion resistance, such as stainless steels, are used for components in direct contact with methanol.
- Hydrogen dual-fuel engine
Hydrogen is a flammable gas which must either be compressed or liquified depending on its use. When green hydrogen, which is produced by using renewable energy sources, is used in an engine, emissions from burning hydrogen is negligible. It does not produce CO2 emissions, but some NOX emissions due to the high temperatures of the combustion process, splitting nitrogen molecules in the air. In practice, not all hydrogen dual-fuel engines are using green hydrogen, and grey hydrogen, which is produced from natural gas, is most commonly used. Moreover, some hydrogen dual-fuel engines operate on a blend of hydrogen and diesel. For example, the hydrogen dual-fuel engine Volvo Penta D13, which is used in a Japanese hydrogen-powered ferry, HydroBingo, runs on a blend of hydrogen and diesel. It was reported that the ferry reduces emissions of CO2 by up to 54% and NOX by 28% when running on a blend of hydrogen and diesel compared to ferries fuelled only by diesel. If there is any issue with hydrogen fuel, the engine can switch to full diesel mode.
There are currently not many vessels using hydrogen as fuel (only 50 hydrogen-powered vessels in operation as of November 2024), and not all of them are using hydrogen in a dual-fuel engine as some vessels are powered by hydrogen fuel cells. Vessels using a hydrogen dual-fuel engine are mostly small to medium-sized domestic vessels. Accordingly existing hydrogen dual-fuel engines are also small four-stroke engines and thus are not suitable for large oceangoing cargo vessels. For instance, MAN D2862 LE448 hydrogen dual-fuel engine, which was installed in Dutch hydrogen-powered crew transfer vessel Hydrocat 48 in 2022, only has an output of 749 kW. As a comparison, the power output of the WinGD X92DF LNG dual-fuel engine for ultra large container ships (ULCS) is 63,840 kW.
Since hydrogen must either be compressed to high pressure or liquified at cryogenic temperatures, the method of hydrogen storage can significantly affect the suitability of different hydrogen dual-fuel engine applications. Engines using compressed or liquid hydrogen require high-pressure tanks or cryogenic systems respectively on board a vessel. Japanese 38-metre-long hydrogen dual-fuel tugboat, which was launched in March 2025, is equipped with a high-pressure hydrogen gas storage system capable of holding 250 kg of hydrogen. For large commercial vessels, much larger storage tanks will be required for dual-fuel engines burning compressed hydrogen. Some engine manufacturers, such as Kawasaki Heavy Industries, are developing a marine hydrogen dual-fuel engine burning liquid hydrogen with a plan to install and demonstrate its engine on a large liquid hydrogen carrier.
- Ammonia dual-fuel engine
Ammonia is a carbon-neutral fuel when produced using renewable energy sources. This green ammonia does not produce any CO2 when burned in the engine but only emits water vapour and nitrogen gas. Most ammonia dual-fuel engines operate using either ammonia or diesel, via diesel-cycle combustion with high-pressure fuel injection. Operators can run the engine on diesel fuel until ammonia is available. When operating on ammonia, the engine burns ammonia as the primary fuel with a small amount of pilot fuel for ignition. Ammonia requires a significant amount of heat to start burning due to its high auto-ignition temperature. The pilot fuel provides an initial spark and heat required to ignite the ammonia. Similar to a traditional diesel engine, air is initially introduced into the combustion chamber and then is compressed by a piston, raising its pressure and temperature. Ammonia is injected into the combustion chamber, followed by a pilot fuel injection for ignition. According to Wärtsilä, its four-stroke ammonia dual-fuel engine can reduce GHG emissions by up to 90%.
Ammonia’s material incompatibility is a significant issue. Ammonia is corrosive to copper, galvanised surfaces, plastics and rubbers. It also reacts with aluminium, zinc and their alloys. Ammonia dual-fuel engines therefore use specialised materials for components and fuel system that are resistant to ammonia corrosion. More importantly, ammonia is highly toxic. It is crucial to prevent ammonia leakage to areas where crew members are present. Ammonia dual-fuel engines are designed with safety features, such as double-wall piping, ventilation arrangement and leakage detectors.
Whilst there is a growing number of ammonia dual-fuel vessels on order, the number of ammonia-fuelled vessels currently in operation is very small, and most of them are small-scale boats using four-stroke dual-fuel engines. Several engine manufacturers, such as WinGD and MAN ES, have developed two-stroke large ammonia dual-fuel engines which are currently available for order. WinGD’s first ammonia dual-fuel engines are set to be delivered in the last quarter of 2025. MAN ES has recently tested its two-stroke liquid gas injection ammonia dual-fuel engine at 100% load for the first time in early 2025, and its first engine is scheduled to be delivered in early 2026.
- Biofuel dual-fuel engine
Biofuels are made by converting organic matter into a fuel product. Some biofuels, such as Fatty Acid Methyl Ester (FAME) and Hydrotreated Vegetable Oil (HVO), are designed to be used as direct replacements for conventional fuels with little or no modifications. They are called drop-in biofuels and are commonly used as blending fuels with diesel. There are no dual-fuel engines exclusively designed for those drop-in biofuels. Many engine manufacturers offer dual-fuel engines that can operate on biofuels in combination with other fuels, including MAN ES, Wärtsilä and Yanmar. These engines can run on a blend of diesel and biofuel, with some engines even capable of operating on 100% biofuel. Dual-fuel engines burning FAME or HVO have the potential to reduce GHG emissions by around 75-100% from a well-to-wake perspective compared to Marine Gas Oil (MGO) according to an article on Evaluation of biofuel effect on performance & emissions of a 2-stroke marine diesel engine using on-board measurements. However, the specific reduction rate is dependent upon the type of biofuel used and its blending percentage.
MAN 175D engine is approved for operation on FAME and HVO biofuels up to a content of 100% without any technical adjustments to the engine itself. It only requires minor adjustments to the fuel-treatment system. According to its manufacturer, a few engine parts experience additional wear, depending on the amount of biofuel and the duration of operation. Another manufacturer Wärtsilä states that all biofuels meeting established standards can be used with its engines. However, the compatibility of fuel system components with a chosen biofuel must be considered because biofuels can react with certain materials, causing degradation, corrosion or other performance issues.

A monofuel hydrogen engine (source: BeH2ydro)
- Specialist engines
Whilst dual-fuel engines are common for alternative fuels, only a limited number of monofuel engines designed for specific alternative fuels are currently available or being developed.
There is no monofuel marine engine designed for running on ammonia only, while ammonia dual-fuel engines are actively being developed. Some dual-fuel engines can run on ammonia as the primary fuel with 5% pilot fuel consumption, but technically they are still dual-fuel because they are designed to operate on two different fuels, not only ammonia.
- Pure gas engine
A pure gas engine was developed by Wärtsilä and was first launched in 2019. The engine is designed to run on gas fuel only, such as LNG and LPG. The main difference between a dual-fuel engine and a pure gas engine is the ignition method. Whilst a small amount of pilot liquid fuel is injected for ignition in a dual-fuel engine, the pure gas engine has a pre-chamber with a spark plug for ignition. The manufacturer estimates its pure gas engine cuts methane slip by as much as 50% compared to dual-fuel engines.
- Methanol engine
There is a marine pure methanol engine developed by Chinese Henan Diesel Engine Heavy Industry in 2024, CHG234V8MMPI. This engine has been developed with a focus on achieving carbon neutrality goals and is designed to operate solely on methanol. It can lower emissions significantly compared to traditional diesel engines. The engine uses methanol as the primary fuel and a small amount of pilot fuel is injected to initiate combustion. It operates on the principle of compression ignition like conventional diesel engines.
- Hydrogen engine
A monofuel hydrogen low-pressure Otto engine has been developed by BeH2ydro, a joint venture of Belgian engine manufacturer ABC and a Belgian shipping company CMB. This zero-emission engine operates solely on hydrogen. It uses a sparkplug ignition unlike hydrogen dual-fuel engines which use a pilot fuel ignition. The engine does not require any aftertreatment system. It has a power output ranging from 1,000 to 2,670 kW. Due to the engine capacity, it is suitable for smaller ships, such as harbour tugs, coasters and inland vessels. Although this hydrogen engine cannot be applied to large commercial cargo vessels, it is expected that the transition to zero emissions could effectively start in port areas. Another engine manufacturer Yanmar is currently developing four-stroke hydrogen engine running on 100% hydrogen with a pilot biofuel ignition for hybrid hydrogen-battery electric vessels. Whilst two-stroke monofuel hydrogen engine for large ships are still under development, hydrogen dual-fuel engines are being installed as a more immediate solution.
- Wind-Assisted Propulsion System (WAPS)
Wind-Assisted Propulsion Systems (WAPS) are technologies that have gained growing interest in the shipping industry as an effective way to reduce fuel consumption and thereby reduce GHG emissions from ships. They are designed to convert wind energy into thrust, supplementing the propulsion of a vessel by reducing the load on its main engine. According to the International Windship Association (IWSA), installing WAPS as a retrofit on vessels has the potential to deliver significant fuel savings of up to 30%. Newbuilds equipped with WAPS can achieve fuel savings of between 50% and 80% depending on several factors, including the type of WAPS, ship size and wind conditions. Another benefit of using WAPS is the use of a cost-free energy source, as wind is a natural source of energy that will never run out. Moreover, vessels using WAPS can reduce their GHG intensity by applying a Wind Reward Factor (WRF) under the FuelEU Maritime regulation. How a WRF reduces a ship’s GHG intensity will be examined in more detail in our third article on EU regulations.
There are six main categories of WAPS according to the European Maritime Safety Agency: rotor sails (or Flettner rotors), hard sails (or wing sails), suction wings (Ventifoils or eSails), soft sails, kite sails and hull technology. Depending on the type of technologies, different principles are used in energy conversion. There are increasing number of vessels being retrofitted with one of the WAPS. According to the IWSA, there were 54 seagoing vessels with WAPS in operation and 97 newbuilds with WAPS on order as of January 2025.

Five 5x35m Rotor Sails installed on a 400,000 DWT ore carrier, Sohar Max (source: Asyad Group)
- Rotor Sails (Flettner Rotors)
Rotor sails, traditionally known as Flettner rotors, are vertical cylinders which spin and produce additional thrust by leveraging the Magnus effect. When wind meets the spinning cylinders, the airflow accelerates on one side and decelerates on the other. This generates a pressure difference that creates a lift and pushes the ship forward. As a result, it reduces the engine load, thereby reducing fuel consumption. Rotor sails can reduce fuel consumption in the range from 5% to 20% depending on wind conditions. Rotors can easily be retrofitted to older vessels. They are mounted on vessel-tailored foundations on deck which carry a variable drive motor to control the speed and direction of the rotor. The motor is the main source of energy that powers the rotor. This means it requires electrical power to spin the rotor. The advanced technology of rotor sails allows for horizontal folding of the vertical cylinders to minimise any potential disruption to the cargo operations of a ship.

The first ship to be retrofitted with two Wing Sails, Mitsubishi’s Pyxis Ocean (source: Cargill)
- Hard Sails (Wing Sails)
Most hard sails are designed with a wing shape, which is why they are also known as wing sails. They are upright wings made from strong and light materials such as carbon fibre. The interaction between wind and sails creates aerodynamic lift, transferring the weight of a ship from the water to the air. This results in reducing fuel consumption of the ship. Whilst wing sails are foldable and can be lowered for cargo operations, they require a relatively large surface area when used. Wing sails are expected to reduce carbon emissions by up to 30% on average.

Spanish tanker company Marflet Marine’s Santiago I with four suction sails (source: bound4blue)
- Suction Wings (Ventifoils or eSails)
Suctions wings are wing-shaped vertical structures mounted on a structural foundation on deck. Unlike rotor sails, their outer parts do not rotate to create thrust. But they can automatically rotate around a vertical axis to adjust to wind direction. The wings have vents and internal fans that create boundary layer suction to generate thrust. This is in addition to the thrust already generated by their wing shape of the sails, maximising the lift generated by the wings and thereby reducing engine power and its fuel consumption. This allows suction wings to generate lift six to seven times higher than wing sails, which means that suction wings will be six to seven times smaller than wing sails for the same thrust. Installing suction wings is usually easy and can be done in hours for some vessel types. Suction wings can reduce fuel consumption up to 60%. The height of suction wings ranges from 10m to 36m, and they can be folded down for passage under bridges. Suction wings require electrical power to operate the fans that create artificial suction.
There are a variety of vessels that have been equipped with suction wings, including bulk carriers, tankers and ro-ro ships. Several major shipping companies, including Spanish Marflet Marine, Danish Maersk Tankers and Eastern Pacific Shipping of Singapore, have placed orders to install suction wings on their vessels. According to Maersk Tankers, 20 suction sails will be installed on its five tankers during drydocking in 2025 and 2026 to help cut CO2 emissions.

The sailing cruise ship, Royal Clipper, with 42 sails across five masts (source: Star Clippers)
- Soft Sails
Soft sails are the closest alternative to traditional sail systems. They harness wind power to generate additional thrust and reduce fuel consumption of ships’ engine, contributing to lower GHG emissions. They are comprised of masts and flexible fabric sails that can be shaped and rolled up. Soft sails are very lightweighted and can be stowed. They require large sail area when used and the lift of sail clothes is limited. Whilst traditional soft sails are still commonly used on yachts, modern soft sail designs incorporating advanced technologies and robust materials have been developed to improve efficiency, durability and performance. For instance, the Dynarig system features freestanding and rotating masts where soft sails are deployed on rigidly attached curved yards. The angle of the sails is adjusted by rotating masts, forming a continuous sail panel with no gaps, unlike traditional soft sails which are usually deployed as individual sails with gaps between them. It is designed for high efficiency with the potential to be twice as efficient as traditional square rigs.
Whilst modern sail designs are mostly considered for large merchant vessels, there is a project to use traditional soft sails on a large commercial ship in Japan. In late 2024, Sumitomo Heavy Industries Marine & Engineering (SHI-ME) and ORIX Corporation have begun a feasibility study on using soft sails to provide wind-assisted propulsion on a geared bulk carrier. The soft sails made of advanced polyethylene fibre fabric will be attached to the cranes on deck and can be adjusted depending on the wind direction. The fuel efficiency of the vessel will be monitored during operation and the energy-saving effects will be calculated based on the data collected from this demonstration.

The 88,000 DWT coal carrier, Corona Citrus, with an automated kite-flying system (source: K Line)
- Kite Sails
Kite sails use a large wing kite that flies at over 200 metres above a ship, where the wind is strongest and most favourable, with a tether attached to the ship’s bow to assist with the propulsion by generating lift and drag. They do not require power from the ship to operate a kite unlike rotor sails which use the ship’s power to rotate their sails. They leverage constant winds at high elevations and can operate either passive or dynamic system. Whilst passive kites follow the wind direction and maintain a single position, dynamic kites fly on a figure-eight trajectory and actively move at a high speed to increase the lift. They can efficiently generate thrust downwind, but the thrust drops rapidly with decreasing wind angles. Passive kites are not as affected by this issue. While the largest kite currently operating for large ships is 1,000 m2, kite sizes up to 5,000 m2 are in development.
Japanese shipping major K Line is actively utilising kite sails for its vessels to reduce emissions. It contracted with a kite manufacturer to install automatic kite units on up to 50 of its vessels in 2022. An automated kite system was first installed on its capesize coal carrier in 2023, and it was estimated to reduce CO2 emissions by at least 20% compared to conventional propulsion. The automated kite system collects and analyse weather data on a real-time basis to ensure the kite flies efficiently. Moreover, the kite can be automatically deployed and stored with simple switching operations.

The Vindskip concept turning the ship’s hull itself into a giant wing (source: Vindskip)
- Hull technology
The hull of a ship can be shaped as a symmetrical aerofoil which can generate lift and pull the ship forward. The hull itself functions as a giant sail, using wind power to generate thrust to propel the ship. The concept of the ship’s hull was developed by Norwegian engineer and is called Vindskip. The Vindskip design can be applied only to newbuilds and is restricted to ro-ro ships. It is a hybrid ship that combines wind propulsion with LNG-powered engines. This aerofoil design can achieve fuel savings of 60% and reduce emissions by 80%. A full-scale Vindskip vessel is not available yet and is currently being developed. Its commercialisation is likely to take many years.

The CO2 capture plant installed on board a coal carrier, Corona Utility in 2021 (source: K LINE)
- Onboard Carbon Capture and Storage (OCCS)
Whilst zero-carbon fuels, such as hydrogen and ammonia, are increasingly gaining traction, a complete transition to those fuels is unlikely to happen anytime soon due to challenges, including high costs, technology readiness and the lack of infrastructure. Onboard Carbon Capture and Storage (OCCS) is emerging as a key technology that can enable continued use of conventional fuels while reducing emissions in the interim. Carbon Capture and Storage is a technology already in use. It was initially developed by the oil and gas industry in the 1970s to purify natural gas and increase oil production by injecting the captured CO2 into oil fields. In the 1980s, CCS was discussed as a strategy to reduce CO2 emissions and mitigate climate change, and has been used in a variety of sectors, including refining, cement, steel and chemicals, for permanent storage or utilisation. According to the Global CCS Institute, there were globally 50 CCS facilities in operation in 2024.
OCCS involves capturing CO2 from ships’ exhaust gases before it is released into the atmosphere and temporarily storing it on board before offloading at a reception facility. The captured CO2 can be stored in various states depending on the capture method but is mostly converted into a liquid form through compression to minimise storage volume. The liquid CO2 is stored in pressurised tanks on board until it is offloaded at port facilities for further processing. Once offloaded, the liquid CO2 is prepared for permanent storage, called sequestration. The prepared CO2 is transported via pipelines or a ship and is injected into deep geological formations, many of which are located sub-seabed.
OCCS technology has been developed and tested on ships. While OCCS is technically feasible, it is not commercially viable yet. Full-scale implementation and commercial deployment are still in the early stages. There are some companies piloting OCCS in their fleets, for instance, Stena Bulk operated tanker Stena Imperotook part in an OCCS trial after retrofitting an OCCS system in 2024. It was found that the OCCS technology could reduce CO2 emission by up to 20% per year. According to the results of the trial, vessels with the retrofitted OCCS can maintain CII rating of “C and better” for an extra 9 years. This means that the vessel can operate in compliance with the IMO CII rating requirements for 9 years. The technical feasibility of OCCS assessed by the Global Centre of Maritime Decarbonisation, the Oil and Gas Climate Initiative and Stena Bulk concluded that OCCS has the potential to significantly reduce GHG emissions from maritime transport.
The high cost of installing and operating OCCS is a significant challenge. According to the above-mentioned project, the cost of retrofitting OCCS is estimated approximately US$13.6M, and its operational expenditure stands at around US$830,000 annually. There are also practical barriers that make OCCS not commercially feasible. For chartered vessels, onboard captured CO2 volumes may fluctuate due to unpredictable routes or schedules. This would make it difficult to optimise the size of onboard storage tanks. Low port readiness for offloading captured CO2 is a big hurdle for the widespread adoption of OCCS. Current port facilities are not equipped with specialised infrastructure required to receive onboard captured CO2. The absence of regulatory support for using OCCS is another major bottleneck.
Despite a growing interest in OCCS as an effective measure for reducing CO2 emissions from ships, there are currently no specific requirements or standards for OCCS. The IMO is currently working on the development of regulatory measures for OCCS. In April 2025, a draft work plan on the development of a regulatory framework for the use of Onboard Carbon Capture and Storage systems was approved by the Marine Environment Protection Committee during its 83rd session (MEPC 83). The work plan deals with both ship and land aspects for OCCS and considers incorporating it into existing regulatory frameworks such as the Energy Efficiency Design Index (EEDI). The work is expected to be finalised in 2028. Additionally, the IMO would also be required to work on revising the International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) to ensure the safe transport of captured CO2 on board ship.
Conclusion
Achieving the ambitious net-zero targets requires the broad adoption of effective decarbonisation technologies. Dual-fuel engines are a crucial step for using alternative fuels, helping bridge the transition. WAPS offers significant potential for reducing emissions by leveraging renewable energy. Additionally, OCCS provides a promising way to reduce emissions from existing ships, working alongside new fuel strategies. Even so, the effective implementation of these technologies will require careful consideration of their specific applications and the ongoing challenges in their development and broader adoption. The successful deployment of these technologies will significantly contribute to accelerating the shift of the maritime sector towards zero emissions. The commitment of the industry to these advanced solutions will be essential to achieve its zero-emission goals and ensure its long-term sustainable operation.